SJE Rhombus Double Float® Master Pump Switch Piggyback for 120/240V, Dual Mechanical Float, 3/4 - 2 HP Control, Adjustable 3"-48" Range, UL/CSA Listed

Product Description

SJE Rhombus Double Float Master

Introducing the SJE Double FloatMaster Piggyback Float Switch Assembly – a versatile and efficient solution for precise pump control in confined spaces. This powerful, non-mercury, dual mechanical float switch assembly is designed for direct control of 120V pumps (up to 3/4 HP) and 240V pumps (up to 2 HP), delivering optimal performance in various applications. With its adjustable pump down range of 3" to 48", the SJE Double FloatMaster offers unparalleled accuracy in small diameter pits and vessels, even in turbulent conditions.

Key Features of the Double Float Master

Direct control for 120V (up to 3/4 HP) and 240V (up to 2 HP) pumps

Maximum run amps: 15 FLA; maximum locked rotor amps: 90 LRA

Suitable for both calm and turbulent applications

Adjustable pump down range of 3" to 48"

Mounting clamps included

Waterproof splice tube with holding relay for seamless float functionality

Piggyback switch feature for easy pump connection and control

UL and CSA listed

5-year manufacturer's warranty

Piggyback feature simplifies pump control

The piggyback switch feature of the SJE Double FloatMaster simplifies pump control, allowing you to connect 120V or 240V pumps directly to the assembly without the need for a separate control panel or relay system. This versatile float switch assembly also enables manual pump operation when automatic control is not necessary, by plugging the pump into a 120V or 240V receptacle. With available cable lengths of 15', 20', and 30', the SJE Double FloatMaster can be customized to suit your specific needs.

Upgrade your pump controls with the SJE Double Float Master

Boost your pump control capabilities with the SJE Double FloatMaster Piggyback Float Switch Assembly – UL and CSA listed, NSF-61 rated, and backed by a 5-year manufacturer's warranty. Invest in this reliable and efficient pump control solution today for enhanced performance and peace of mind.

 Specifications

Cable

Attached to float housing: Flexible 18 gauge, 2 conductor (UL, CSA) SJOW, water-resistant (CPE)

Above splice: Flexible 14 gauge, 3 conductor (UL, CSA) SJTW, water-resistant thermoplastic

Floats

2.74 inches diameter x 4.83 inches long (7.0 x 12.3 cm) high impact, corrosion resistance, PP housing for use in sewage and water up to 140°F (60°C)

Electrical 120V AC

120 VAC 50/60 Hz Single Phase:

Maximum Pump Running Current (FLA): 15 amps

Maximum Pump Starting Current (LRA): 90 amps

Electrical 240V AC

240 VAC 50/60 Hz Single Phase:

Maximum Pump Running Current (FLA): 15 amps

Maximum Pump Starting Current (LRA): 90 amps

NOTE: This switch must be used with pumps that provide integral thermal overload protection.

A Pump Switch is designed for Horsepower (HP) rated loads and is not suitable for control (pilot duty) applications. It will fail prematurely when switching loads less than 1 Amp at 120 VAC. Select a float switch from our Control Switch offering for control applications.