Product Description
The General Pipe 1/8" Nozzle Sets includes 4 water jetter nozzles with 1/8" FNPT threads. Note: Not all 1/8" jetter nozzles will work properly with all jetters that have 1/8" NPT hose ends even though the nozzles will thread onto the hose fitting. Larger and more powerful jetters produce more pressure and volume and require nozzles with larger orifices to work efficiently. Jetters that produce less pressure and volume require nozzles with smaller orifices. Please refer to the table below.
1/8" Female NPT penetrating nozzle with forward jet - 15°. Forward jet cuts though grease, dislodges mud and debris, and melts ice. Narrow spray pattern to the rear offers maximum thrust to push the hose down the line.
1/8" Female NPT penetrating nozzle - 15°
1/8" Female NPT flushing nozzle - 30°. Wide spray pattern clears debris and flushes the line clean. Good finishing tool after the stoppage has been cleared.
1/8" Female NPT spring leader nozzle. Flexible spring on the front of the nozzle helps guide hose around tight bends. Narrow spray pattern to the rear offers maximum thrust to push the hose down the line.
1/8" Nozzle Kit Model #
Part #
Jetter Maximum Flow and Pressure
Use with General Jetter Model:
JN-0
176500
1.7 GPM | 1500 PSI
JM-1000, JM-1450
JN-30
176530
4 GPM | 3000 PSI
JM-2900, JM-3000
JN-60
176730
5.5 GPM | 3000 PSI
JM-3055
