Product Description
High-Output Submersible Pump for Water Removal and Transfer
The Flotec FP0S1300X is a portable, submersible utility pump
designed for a wide range of household dewatering tasks. It is commonly used
for emergency basement water removal, emptying window wells, and draining
rooftops or stock tanks. Its corrosion-resistant thermoplastic body and
dependable 1/6 HP motor make it a practical solution for general water
transfer needs.
Key Benefits – Flotec FP0S1300X Utility Pump
Removes unwanted water at up to 1,470 GPH for efficient dewatering.
Draws water down to 3/16" for effective removal from flat surfaces.
Supports continuous-duty operation when fully submerged.
Lightweight and portable for easy transport and placement.
Includes a garden hose adapter for quick connection.
Rated for water temperatures up to 77°F (25°C).
Product Specifications
Category
Details
Item Number
FP0S1300X-08
Horsepower
1/6 HP
Body Construction
Thermoplastic
Maximum Capacity
1,470 GPH
Flow at 10' Lift
930 GPH
Maximum Lift
20 ft
Discharge Size
1" Female NPT
Voltage
115V AC, 60 Hz
Required Branch Circuit
15 Amp
Cord Length
8 ft
Minimum Starting Depth
1/2"
Maximum Water Temperature
77°F (25°C)
Weight
6.4 lbs
Warranty
1-Year Limited
What’s Included
Flotec FP0S1300X Submersible Utility Pump
Garden hose adapter
Owner’s manual
Key Features – Flotec FP0S1300X
Thermoplastic Construction:
Corrosion-resistant housing designed for long service life.
Fully Submersible Design:
Quiet operation directly in the water being removed.
Portable and Lightweight:
Easy to carry and position for temporary or emergency use.
Removable Inlet Screen:
Protects the impeller and allows quick cleaning.
Thermal Overload Protection:
Automatic reset protects the motor from overheating.
Performance Overview
The Flotec FP0S1300X delivers a maximum flow rate of 1,470 GPH at zero lift.
As discharge height increases, flow rate decreases accordingly. The pump is
designed for continuous operation when fully submerged, using surrounding
water for motor cooling. Best performance is achieved when the pump is placed
on a level, solid surface.
Typical Performance
Lift Height
Flow Rate (GPH)
0'
1,470
5'
1,250
10'
930
15'
660
20'
0
Common Applications
Basement water removal
Window well drainage
Flat roof dewatering
Stock tank and container draining
Yard and jobsite water removal
General-purpose water transfer
Installation & Operation Guidelines
This is a manual pump; an external switch is required for automatic use.
Do not operate unless the pump is submerged in at least 1/2" of water.
Not suitable for salt water, brine, fountains, waterfalls, or fish habitats.
Use a dedicated 115V, 15 Amp grounded outlet.
For best performance, use a short, kink-free 3/4" hose.
Get the Flotec FP0S1300X from Cleanflow
Cleanflow supplies reliable residential
water management equipment across Canada and the USA.
Explore our full line of
Flotec products
to find the right solution for your project.
Frequently Asked Questions
Is the Flotec FP0S1300X automatic?
No. This is a manual utility pump that must be plugged in and unplugged
to operate. It does not include a float switch.
What is the minimum water depth required?
The pump requires at least 1/2 inch of water to start and can draw water
down to approximately 3/16 inch from flat surfaces.
Can this pump handle hot water?
No. The maximum rated water temperature for the Flotec FP0S1300X is
77°F (25°C).
Can this pump run unattended?
No. This pump should not be left unattended, as running dry can damage
the motor if water levels drop too low.
Can it handle solids or debris?
No. This utility pump is designed for clean water only and is not
intended to pump solids, sand, sludge, or debris.
