Pulse Series Solenoid

Product Description

IN STOCK 

Premium Alcohol injection solenoid 

Our Pulse Series solenoidsare ideal for applications which require the solenoid to be pulsed (PWM). This solenoid can also be used in non PWM applications.What makes this solenoid special is its small size, low amperage draw and ability to by cycled extremely fast making it ideal for progressive applications. Features include a large .125" orifice capable of flowing over 45 GPH @ 200 PSI with a maximum pressure rating of 300 PSI. Compare against the competitors valves and see the difference for yourself.

Features Include:

.125" orifice

300 psi max

EPDM plunger

1/8 NPT female ports

Normally closed position

16 gauge wire leads

Flows 48 gph @open flow

Coil watts 9

Class "H" coil rating

Rated up to 355 degree's

Amperage draw .7 amps

Stainless steel valve body

Steel powder coatedcoil housing

Light weight plunger (5.9 grams)

Overall height 1.95"

Valve body diameter 1.00"

Coil housing diameter 1.03"

20 minutes of continuous use recommended

100% methanol compatible

Made in the USA

Special Notes:

Fittings are not included and provided as an option

Can be used with progressive controller and safely ran at 20-25 hertz @ 200 PSI. You may increase the hertz to 30 with lower pump pressure of 160 psi

Contents Include:

Solenoid (1)

16 gauge wire (10ft)

16 gauge butt connectors (2)

16 gauge ring terminal (1)

Grounding screw (1)

Special Notes:

Fittings are not included 

Can be used with aftermarket EFI engine management systems such as Holley Dominator, Holley Terminator, Holley HP, Haltech, FAST XFI, MegaSquirt, MS3 Pro, FuelTech, Motec, AEM Infinity

Can be used with TorqeByte, Cortex Controller and other water methanol injection systems such as SNow Performance, AEM, Alky Control.

Instructions:

Our Pulse Series solenoidsare ideal for applications which require the solenoid to be pulsed (PWM). This solenoid can also be used in non PWM applications.What makes this solenoid special is its small size, low amperage draw and ability to by cycled extremely fast making it ideal for progressive applications. FeatureOur Pulse Series solenoidsare ideal for applications which require the solenoid to be pulsed (PWM). This solenoid can also be used in non PWM applications.What makes this solenoid special is its small size, low amperage draw and ability to by cycled extremely fast making it ideal for progressive applications. FeatureOur Pulse Series solenoidsare ideal for applications which require the solenoid to be pulsed (PWM). This solenoid can also be used in non PWM applications.What makes this solenoid special is its small size, low amperage draw and ability to by cycled extremely fast making it ideal for progressive applications. Features include a large .125" orifice capable of flowing over 45 GPH @ 200 PSI with a maximum pressure rating of 300 PSI. Compare against the competitors valves and see the difference for yourself. Features Include: .125" orifice 300 psi max EPDM plunger 1/8 NPT female ports Normally closed position 16 gauge wire leads Flows 48 gph @open flow Coil watts 9 Class "H" coil rating Rated up to 355 degree's Amperage draw .7 amps Stainless steel valve body Steel powder coatedcoil housing Light weight plunger (5.9 grams) Overall height