Product Description
Rugged Cast Iron Automatic Submersible Sewage Pump
Product Overview
The Flotec FPSE3601A is a submersible sewage ejector pump for residential sewage and effluent removal applications. It is commonly installed in basements and used with below-grade toilets or laundry facilities to move wastewater effectively. The pump's construction features a heavy-duty cast-iron body for durability. Its motor provides the necessary power for demanding residential water management tasks.
Key Benefits – Sewage Pump
Moves up to 9,000 gallons per hour for efficient wastewater removal.
Handles solids up to 2 inches in diameter, reducing the risk of clogging.
Offers automatic operation with a tethered float switch for convenience.
Provides reliable performance in residential sewage and effluent systems.
Supports heavy-duty use with its rugged cast-iron construction.
Compatible with standard 2" NPT discharge plumbing connections.
Product Specifications
Category
Details
Model Number
FPSE3601A
Pump Type
Submersible Sewage Pump
Horsepower
1/2 HP
Body Construction
Cast Iron
Voltage
115V, 60 Hz
Amperage
13 Amps
Recommended Breaker
20 Amp
Switch Type
Tethered Float Switch (Automatic)
Maximum Flow Rate
9,000 GPH
Flow at 10-Foot Lift
5,400 GPH
Discharge Pipe Size
2" NPT
Maximum Solids Handling
2"
Cord Length
10'
Agency Listing
CSA and CUS
What’s Included
Flotec FPSE3601A 1/2 HP Cast Iron Sewage Pump
Factory-installed 10' power cord
Tethered float switch
Key Features – Flotec FPSE3601A Sewage Ejector Pump
Rugged Cast Iron Construction
The heavy-duty cast iron body ensures durability and reliable performance in demanding sewage applications.
1/2 HP Motor
Provides strong and consistent power for moving high volumes of water and solids.
2" Solids Handling Capability
This sewage ejector pump passes solids up to 2 inches in diameter to prevent clogs and maintain flow.
Tethered Float Switch
Enables automatic operation, turning the pump on and off as water levels rise and fall in the basin.
High-Capacity Pumping
Capable of moving up to 9,000 gallons per hour, making it suitable for significant water removal needs.
Applications
Residential sewage systems
Basement wastewater removal
Pumping from below-grade toilets
Laundry facility drainage
Effluent removal
Underground parking drainage
Dewatering at construction sites
Installation & Operation Guidelines
This is a submersible pump intended for operation within a sewage or effluent basin.
For sewage applications, the minimum recommended pipe size is 2 inches.
For effluent applications, the minimum pipe size is 1-1/2 inches.
The pump requires connection to a 115V circuit protected by a 20-amp breaker.
The tethered float switch requires adequate space in the basin to move freely for proper automatic operation.
Get the Flotec FPSE3601A Sewage Ejector Pump from Cleanflow
As the most widely available retail pump brand in America, Flotec has been a leader in residential water management for over 30 years. This Flotec FPSE3601A sewage ejector pump is a reliable choice for your home's wastewater needs. Cleanflow is your trusted supplier for a complete line of Flotec Pumps and related accessories.
FAQs
Is this a sewage ejector pump?
Yes. This model is a sewage ejector pump designed to handle raw sewage and solid waste from below-grade plumbing systems.
What is the difference between a sewage pump and an effluent pump?
A sewage pump, like this FPSE3601A model, is a sewage ejector pump designed to handle raw sewage and solid waste, typically up to 2 inches in diameter. An effluent pump is designed to handle treated wastewater with smaller, softer solids.
Can this 1/2 hp sewage ejector pump run continuously?
This sewage ejector pump is designed for automatic operation via its float switch, turning on only when needed. It is not intended for continuous-duty operation.
What kind of electrical connection does this pump need?
The Flotec FPSE3601A requires a 115-volt, 60 Hz electrical outlet on a circuit with a recommended 20-amp breaker.
Is this pump difficult to install?
Installation involves standard plumbing and electrical work. Always follow the manufacturer's instructions and local codes. If you are not comfortable with the process, hiring a professional is recommended.
Can I use a smaller discharge pipe than 2 inches?
For sewage applications, a minimum pipe size of 2 inches is required to ensure the pump can pass 2-inch solids without clogging. Using a smaller pipe can lead to blockages and pump failure.
What is the purpose of the tethered float switch?
The tethered float sewage pump 1/2 hp model uses the switch for automatic operation. As the water level in the basin rises, the float lifts and activates the pump. When the water is pumped out, the float lowers and shuts the pump off.
