Product Description
In Stock
Looking for a simple and affordable way to activate your water methanol injection system. Our heavy duty billet brass adjustable boost switches are the highest quality in the industry. Adjustments are made via a small 1/8" allen screw (allen wrench provided) recessed in the top of the switch.
Features Include:
Adjustable from 20-120 PSI
Normally open contacts
Made from billet brass
1/8-27 NPT male port
.250" spade terminals
Small compact design
Polarity can be reversed
Voltage input 12-16 VDC
Piston diaphragm design
1/8" allen screw adjustment
Can with stand up to 1200 psi
Repeatability +/- 3% of set point
Temperature range -20 F to 205 F
Dimensions 2.20" long by 1.0" wide
Dependable long life (1 million cycles)
Special Notes:
Switch comes preset at 40 PSI
Switch must be used with a relay
Polarity does not matter, switch can be wired both ways
Contents Include:
Pressure switch (1)
Barbed tee fitting (1)
Barbedfitting (1)
Hose clamps (4)
Allen wrench (1)
Spade connectors (2)
Rubbertubing (2 ft)
Special Notes:
Switch comes preset at 40 PSI
Switch must be used with a relay
Polarity does not matter, switch can be wired both ways
Instructions:
Looking for a simple and affordable way to activate your water methanol injection system. Our heavy duty billet brass adjustable boost switches are the highest quality in the industry. Adjustments are made via a small 1/8" allen screw (allen wrench provided) recessed in the top of the switch. Features Include: AdjustaLooking for a simple and affordable way to activate your water methanol injection system. Our heavy duty billet brass adjustable boost switches are the highest quality in the industry. Adjustments are made via a small 1/8" allen screw (allen wrench provided) recessed in the top of the switch. Features Include: AdjustaLooking for a simple and affordable way to activate your water methanol injection system. Our heavy duty billet brass adjustable boost switches are the highest quality in the industry. Adjustments are made via a small 1/8" allen screw (allen wrench provided) recessed in the top of the switch. Features Include: Adjustable from 20-120 PSI Normally open contacts Made from billet brass 1/8-27 NPT male port .250" spade terminals Small compact design Polarity can be reversed Voltage input 12-16 VDC Piston diaphragm design 1/8" allen screw adjustment Can with stand up to 1200 psi Repeatability +/- 3% of set point Temperature range -20 F to 205 F Dimensions 2.20" long by 1.0" wide Dependable long life (1 million cycles) Special Notes: Switch comes preset at 40 PSI Switch must be used with a relay Polarity does not matter, switch can be
