Water Methanol Injection Pump (30 GPH/1890CC Per Minute @ 190 psi)

Product Description

In Stock 

Features Include:

Pressure adjustable from 100-300 PSI

3/8 NPT female inlet & outlet port

Motor turns 1750 RPM @ 12 volts

13.5 amperage draw

Built-in bypass valve

Built-in thermal protection

Built-in anti reverse check valve

Built-in heat sinkon back of motor

Heavy duty dual EPDM pump seals

Pressure adjustable from 100-300 PSI

Can run dry up to 1 hour without damage

100% methanol compatible

Tested prior to shipping

Made in the USA

Weight 5.2 lbs

Flow & Horsepower Ratings @ 13.5 Volts:

1.4 gallons per minute open flow

115 liters per hour @ 190 PSI

30 gallons per hour@ 190 PSI

1890 cubic centimeters @ 190 PSI

Supports up to 1700-2200 horsepower - 100% water mix

Supports up to 1000-1300 horsepower -50/50 water methanol mix

Supports up to 800-1100 horsepower - 100% methanol mix

Special Notes:

Do not use with petroleum products (E85, E98, gasoline, diesel, etc)

Use 12 gauge wire for power and ground

Does not include pump fittings. Pump fittings are available for sale separately

Pumps come preset at 220 PSI

Expect 4-5 years of service if pump pressure is left at 220 PSI or below

Running the pump over 250 PSI is not advised and will shorten pumps life

All testswere performed using a 6AN stainless steel braided hoseon the inlet side of pump

Using1/4" outside diameter nylonon the inlet side of the pump will reduce pump performance and flow output

Pump may be mounted vertical or horizontal

Contents Include:

Pump (1)

Special Notes:

Do not use with petroleum products (E85, E98, gasoline, diesel, etc)

Does not include pump fittings. Pump fittings are available for sale separately

Pumps come preset at 220 PSI

Expect 4-5 years of service if pump pressure is left at 220 PSI or below

Running the pump over 250 PSI is not advised and will shorten pumps life

All testswere performed using a 6AN stainless steel braided hoseon the inlet side of pump

Using1/4" outside diameter nylonon the inlet side of the pump will reduce pump performance and flow output

Pump may be mounted vertical or horizontal

Features Include: Pressure adjustable from 100-300 PSI 3/8 NPT female inlet & outlet port Motor turns 1750 RPM @ 12 volts 13.5 amperage draw Built-in bypass valve Built-in thermal protection Built-in anti reverse check valve Built-in heat sinkon back of motor Heavy duty dual EPDM pump seals Pressure adjustaFeatures Include: Pressure adjustable from 100-300 PSI 3/8 NPT female inlet & outlet port Motor turns 1750 RPM @ 12 volts 13.5 amperage draw Built-in bypass valve Built-in thermal protection Built-in anti reverse check valve Built-in heat sinkon back of motor Heavy duty dual EPDM pump seals Pressure adjustaFeatures Include: Pressure adjustable from 100-300 PSI 3/8 NPT female inlet & outlet port Motor turns 1750 RPM @ 12 volts 13.5 amperage draw Built-in bypass valve Built-in thermal protection Built-in anti reverse check valve Built-in heat sinkon back of motor Heavy duty dual EPDM pump seals Pressure adjustable from 100-300 PSI Can run dry up to 1 hour without damage 100% methanol compatible Tested prior to shipping Made in the USA Weight 5.2 lbs Flow & Horsepower Ratings @ 13.5 Volts: 1.4 gallons per minute open flow 115 liters per hour @ 190 PSI 30 gallons per hour@ 190 PSI 1890 cubic centimeters @ 190 PSI Supports up to 1700-2200 horsepower - 100% water mix Supports up to 1000-1300 horsepower -50/50 water methanol mix Supports up to 800-1100 horsepower - 100% methanol mix Special Notes: Do not use