Product Description
High-Capacity Cast Iron Sewage Pump For Demanding Residential Waste Removal
Product Overview
The Flotec E75STVT sewage pump is a professional series submersible unit engineered for residential sewage or septic system applications. It operates in sewage basins to eject wastewater containing solids up to 2 inches in diameter. Constructed with heavy-duty cast iron, this 3/4 hp sewage pump is ideal for below-grade installations that require reliable waste transfer. The tethered float switch provides automatic operation for standard sump pits.
Key Benefits – Flotec E75STVT Sewage Pump
Delivers up to 170 GPM maximum capacity for rapid waste removal
Passes spherical solids up to 2 inches in diameter to prevent clogging
Features automatic operation with a reliable tethered float switch
Fits standard sewage basins with a minimum diameter of 18 inches
Connects easily to standard 2-inch NPT discharge pipes
Operates efficiently with a PSC motor designed for smoother, quieter performance
Product Specifications
Category
Details
Model
E75STVT
Horsepower
3/4 HP
Body Construction
Cast Iron
Maximum Capacity
170 GPM
Flow at 10' Lift
125 GPM
Max Lift (Head)
23 ft
Solids Handling
2" Spherical Solids
Switch Type
Tethered Float Switch
Switch On Level
7-1/2"
Switch Off Level
3"
Discharge Size
2" NPT
Voltage
115V, 60 Hz
Amp Draw
9 Amps
Cord Length
10'
Liquid Temp Range
32°F - 70°F (0°C - 21°C)
Min. Sump Diameter
18"
Agency Listing
CSA and CUS
What’s Included
Flotec E75STVT Sewage Pump
Attached Tethered Float Switch with Piggyback Plug
10' Power Cord
Key Features – Flotec E75STVT
Cast Iron Construction
The rugged cast iron housing dissipates heat effectively and resists damage during installation, ensuring a longer service life in harsh environments.
PSC Motor Technology
The Permanent Split Capacitor (PSC) motor draws fewer amps (9A) while providing high starting torque, resulting in energy efficiency and quieter operation compared to standard shaded pole motors.
Rust-Proof Impeller
The durable impeller design resists corrosion and wear, maintaining consistent performance when moving wastewater and solids.
Tethered Float Switch
The integrated sewage ejector pump with tethered float switch allows for automatic cycling with a piggyback plug for manual override capabilities during troubleshooting.
2-Inch Discharge
Standard 2" NPT discharge meets plumbing codes for Sewage Pumps and allows for the free passage of 2-inch solids.
Performance Curve
This 3/4 hp sewage pump provides high-volume performance suitable for standard residential lifts. It moves 125 GPM at a 10-foot vertical lift and maintains flow up to a maximum head of 23 feet. The pump is rated for intermittent duty in residential sewage applications.
Head (Lift)
Flow Rate (GPH)
Flow Rate (GPM)
5 ft
11,400
190
10 ft
9,180
153
15 ft
6,300
105
20 ft
2,400
40
24 ft
0
0
Applications
Residential sewage ejection
Septic system tank transfer
Basement bathroom additions
Below-grade laundry drainage
High-capacity dewatering
Effluent transfer
Important Use Notes
Solids Handling: This is a sewage pump that handles 2-inch solids; do not use for fluids containing larger debris.
Basin Size: Requires a minimum sump pit diameter of 18" and a minimum depth of 30" to allow the tethered switch to swing freely.
Check Valve: A 2-inch check valve must be installed in the discharge line to prevent backflow.
Venting: A 3/16" vent hole must be drilled in the discharge pipe below the check valve to prevent air-locking.
Liquid Temperature: Designed for pumping liquids between 32°F and 70°F.
Get the Cast Iron Sewage Pump from Cleanflow
Flotec Pumps are one of the most widely available retail pump brands, leading residential water management for over 30 years. Ensure reliable waste management for your home with the Flotec E75STVT sewage pump. Cleanflow delivers this professional series cast-iron unit directly to your door across Canada and the USA, providing authentic Flotec products with accurate technical support.
FAQs
Can this pump replace my existing 1/2 HP sewage pump?
Yes, this cast-iron sewage pump, 3/4 hp model, is a suitable upgrade for most residential basins, provided you have a 2-inch discharge pipe and a basin at least 18 inches wide.
Does this pump come with a check valve?
No, a check valve is not included. You must install a 2-inch check valve separately in the discharge line.
What is the difference between manual and automatic operation?
This unit comes with a piggyback plug. For automatic use, plug the switch into the outlet and the pump into the switch plug. For manual operation (testing only), plug the pump directly into the outlet.
Is this pump submersible?
Yes, the Flotec E75STVT is a fully submersible pump designed to operate completely underwater in the sewage basin.
What size pipe do I need?
You must use a minimum 2-inch diameter pipe for sewage applications to handle the 2-inch solids capability of the pump.
Free shipping. Usually ships within 4 days. 
