Product Description
The General Pipe 1/4" Nozzle Sets includes 4 water jetter nozzles with 1/4" FNPT threads. Note: Not all 1/4" jetter nozzles will work properly with all jetters that have 1/4" NPT hose ends even though the nozzles will thread onto the hose fitting. Jetters that produce more pressure and volume require nozzles with larger orifices. Jetters that produce less pressure and volume require nozzles with smaller orifices. Please refer to the table below.
1/4" FNPT penetrating nozzle with forward jet - 15°. Forward jet cuts though grease, dislodges mud and debris, and melts ice. Narrow spray pattern to the rear offers maximum thrust to push the hose down the line.
1/4" FNPT penetrating nozzle - 15°
1/4" FNPT flushing nozzle - 40°. Wide spray pattern clears debris and flushes the line clean. Good finishing tool after the stoppage has been cleared.
1/4" FNPT spring leader nozzle. Flexible spring on the front of the nozzle helps guide hose around tight bends. Narrow spray pattern to the rear offers maximum thrust to push the hose down the line.
1/4" FNPT Nozzle Kit Model #
Part #
Jetter Maximum Flow and Pressure
Use with General Jetter Model:
JN-10
176510
1.7 GPM | 1500 PSI
JM-1450
JN-40
176540
4.0 GPM | 3000 PSI
JM-2900, JM-3000
JN-70
176740
5.5 GPM | 3000 PSI
JM-3055
JN-100-1
181010
8.0 GPM | 3000 PSI
JM-3080
